Found two issues skin-related
· Left and Right aren't equal (or approximately) vertically (generating template with 2048x2048, Left is 1414x382 and Right is 1414x373)
·Left side has a hole (I supposse fuel cap was there but was covered/replaced, like the Faith GT had)
· 4th color slider also paints that back panel on the sides. This affects all 4 configurations. Most noticeable when using FIRE config (7th and 8th screenshot)
· When painting that part of the skin template it also paints the aforementioned panels
For reference: Green with Black and Green with Pink is default skin but using color sliders, and Grey with Red is a custom skin
Checked the PZG Compact and PZG Rally, the grille now shows the custom color, both the vents grille and the Young GTi/Dune GTi grille. Only one missing is the CITY variant (Attachment #4)
Probably should include exactly what I mean with symmetrical next time . I mean symmetrical regarding pixels comparing both sides.
Version 19 (prior to skin map fixes) Right side was 1384 x 393 and Left side was 1399 x 393 (with 2048px black and white skin texture)
Version 20 (current) Right side is 1400 x 393 and Left side is 1399 x 393 (with 2048px black and white skin texture) which is in between the margin error. It's fixed as it is now, no need to do more to it
This issue happens when a car is stalled, put it in any gear (1st, etc) preferable on a slight slope and spam the Ignition button (Manual clutch is needed for this to happen). From what I heard it comes down to the engine sound settings, but since I don't know what setting to tune I can't determine what causes it. Probably how LFS generates the engine sound with certain settings generate this side effect.
Yes, the base mod's ( https://www.lfs.net/forum/post/1979831 ) model was stolen from cadnav and then re-uploaded to a site from where the modder got it from, so all of the derivatives where removed
Skin maps have a few errors
· Right and Left sides are not symmetrical horizontally
· The front is sretched and it overlaps the hood, which makes skinning a bit difficult on that area
There is a little error in the skin mapping on the Left side. If I just paint a color its hidden but when drawing shapes around it with different colors it becomes noticeable
It's attached to the "main" body (color slider #1). Windshield wiper is also coloured by that slider.
Was thinking if maybe you could make a separate slider for them and also add an square in the skin template so it applies the custom skin color on it.
Update: I was looking at the attachments and I noticed the steering wheel column is showing the skin
·Dashboard: The current dashboard has the ABS light overlapping the Oil light (Attachment #1)
·Skin Mapping:
·1 Sides are not symmetrical both horizontally and vertically. They also overlap and the top one (Right) is cut off on the rear (off screen seen inside the red enclosement).
·2 The rear goes off screen cutting a bit of the right side wireframe
·3 The top goes off screen cutting a bit of the wireframe (seen inside the red enclosement)
(I'm an skin freak so I detail any mishaps, sorry about that )