I made short drift 3345
Lapper say that 3345,83800952143
Where i make change in config-file for delete numbers after coma?
I need this score 3345, but not need 3345,83800952143
Where is this parameter in LFSLapper.lpr ?
Not with Lapper but it could be made using a PHP-script and connecting Lapper to that.
The script has to read out drift.txt and convert it to an array, which good be sorted on date set. This script could show the best time and send it to Lapper.
I'm hoping you can help me sort an an issue with displaying the drift score. I have the latest LSFLapper and its all connected properly and working, I get certain messages such as PB split times and 0 100km but no drift score.
I've been on drift servers where each drift you do it will show you immediately after completing the score what you just got and adds it to a total for that lap. it evens says when you have performed a big drift.
I can see all these options in the config file but I don't see anyway to enable the display of these ingame.
I'll be eternally grateful for any help you might have to get the score to show while I'm driving
$DriftDatabase = "./DriftPB.txt";
# Actions to do on new personal best drift lap. /*
Event DriftPBAction()
cmdLFS( "/rcm " . $Nickname . "^3 made new PB: ^7" . $DriftScore . " ^3pts!" );
cmdLFS( "/rcm_all" );
EndEvent
Event DriftPBAction()
cmdLFS( "/msg " . $Nickname . "^3 made new PB: ^7" . $DriftScore . " ^3pts!" );
EndEvent */
# Actions to do to when total lap drift score is higher or equal to MinimumDriftScore. /*
Event DriftLapAction()
cmdLFS("/msg " . $Nickname . " ^3drifted to ^7" . $DriftScore . " ^3pts" );
EndEvent */
..
..
Tim, I can't thank you enough, works perfectly now.
I wish I had asked earlier, you wouldn't believe how long Ive been scratching my chin over this
Kudos to all the guys here that have the time and patients to help others out. I've only been playing LFS for just over a week and I have to say it has a great community!
Thanks for the new test-version.
The things I found so far:
-using Shift+P gives the following message on the console of Lapper: Sub 'EnterPitAction' not found in your config file
*this sub is blocked by default in config file so no error should be thrown.
-Doing practise session and going to pit for adjusting setup still spectates you after 20 seconds
*a driver in pits should be ignored by the idle routine
I found out on one of the demo server i run ( [NLR]NL Racing#3) that one guy logged in with different usernames and different nicknames (6 times) but with the same IP adress and he banned everyone on the server.
Is there a posibility to kick or ban player's on IP?
IF IP=71.52.159.2 THEN /KICK the Muppet.
I use on that server still 5.641 and can see in the log file of the dedi the IP's.
Username Nickname IP
trilby NorthCrest 71.52.159.2
trilby1 ‘‘‘ RALPH 71.52.159.2
trilby2 louis 71.52.159.2
trilby3 Dante 71.52.159.2
trilby4 Mussolini 71.52.159.2
trilby5 Æs^C³r 71.52.159.2
‘‘‘ RALPH^L voted to ban - taurus -^L (- taurus -^L) [1/5] (press 1)
Fusion. Dan^L voted to ban - taurus -^L (- taurus -^L) [2/5] (press 1) louis^L voted to ban - taurus -^L (- taurus -^L) [3/5] (press 1) Dante^L voted to ban - taurus -^L (- taurus -^L) [4/5] (press 1)
12 hour ban imposed on user name Mussolini^L completed the vote
- taurus -^L was banned
/msg - taurus - leave connection
- taurus - leave connection Mussolini^L voted to ban jamppa^L (jamppa24^L) [1/5] (press 1)
/msg NorthCrest is idle ! Spectate in 10 seconds
NorthCrest is idle ! Spectate in 10 seconds
Fusion. Dan^L voted to ban jamppa^L (jamppa24^L) [2/5] (press 1) Dante^L voted to ban jamppa^L (jamppa24^L) [3/5] (press 1) ‘‘‘ RALPH^L voted to ban jamppa^L (jamppa24^L) [4/5] (press 1)
12 hour ban imposed on user name NorthCrest^L completed the vote NorthCrest^L voted to ban jamppa^L (jamppa24^L) [1/5] (press 1)
jamppa^L was banned
NorthCrest^L voted to END RACE
/msg jamppa leave connection
jamppa leave connection
I don't think that Insim send IP adress of the connected player. I can't do anything.. But now if you have his username, you can ban it!
For the official version, i want to terminate expr evaluation with '&&' and '||' to have multiple test in one.
I planned also to add
WHILE(...)...ENDWHILE
FOR(...)...ENDFOR
CALL function() with args and return value from a function
Hard work, the final version it's not for tommorow
I'm constructing some sort of Pitbord shown on every split and it's working very well. Still I have a request for it. Please make $LapTime available in the Splitting section. At the moment I can only display the last split-time (see screenshot) so it would be great if you could make an option to remember split1/split2/split3 (if available ofcourse) so I can display all sectors on the pitbord. Those values should be cleared shortly after crossing the finish-line.
Ow men, you are my alltime hero from now on!
Great great work and as said before, highly appreciated.
[edit 17:57]
Tested the new function and found a small bug.
$Split2 is remembered with the full laptime instead of the sectortime. (see screenshots. First is taken after passing sectorline 2, second one is taken after crossing finishline)
Extra wish for the splitting section:
Split $BestSplit into $BestSplit1 , 2 and 3
Add $color2 and 3 so every sector can have it's own color
Extra extra wish (sorry to bother you so much *shame*):
Option to display the gap to the player in front and behind you and attach a color to that.
Where green is a smaller gap and red a bigger one.
The problem is I can only asign one value to $color.
So if split1 is faster then bestsplit, this is displayed in green, if then split2 is slower as bestsplit this is displayed in red but also split1 turns red because $color is set to red. Therefore I need seperated color-values to asign to the different splits.
it's not new colors var you need but $BestSPB for each split and last lap.
$BestSPB1
$BestSPB2
$BestSPB3
$BestSPBLast
or Better
One event for split1, split2, split3, splitLast, in this case you display only button for this event. When onSplit1 is reached, clear all button and create a new set.
onSPlit1, clear old button and then draw all button
onSplit2, draw only split 2
onSplit3, draw only split 3
onSplitLast, draw only splitLast
For now i give you a new version. I hope you have all var needed
Did I already said that you are my hero?
Man you are fast, as said by Andy, and delivering almost when asked to.
Sorry to bother you so much on your sunday but again, it's highly appreciated from my side and by many other people I think.
Thank you so much!
[edit 21:23]
I've got it all working perfectly now.
There's just a small problem with: $SectorBestSplit1 , $SectorBestSplit2 , $SectorBestSplit3 , $SectorBestSplitLast , they show (unknown) instead of a value.
Minor bug I think
What exactly do you want to know? First download Lapper from the first page (choose between stable version or test version) and safe the file on your computer. Then extract the files from the archive to a folder. Open that folder, go to the CFG-folder and open LFSLapper.cfg (stable version) or LFSLapper.lpr (test version). The only thing you have to change is the admin-password and safe the file. Then start you LFS-server and open the insim-port by typing /insim 29999 and hitting enter. The last step is to start NetStartDefault.bat to start Lapper.
, sorry. 