Published: CAPTAIN FAMILY (version: 1) Submitted by: maganabr45 Details page: https://www.lfs.net/files/vehmods/7853F5 DESCRIPTION: Quote :Parts such as the steering wheel, wheels,cockpit and facelift were modeled by me : https://www.youtube.com/watch?v=8DrpNm1Auhg COVER SCREENSHOT:
Published: PATRIOT (version: 1) Submitted by: bayanofmansorofisky Details page: https://www.lfs.net/files/vehmods/CCA66F DESCRIPTION: Quote :Although it may be born in 2006,but this mansion on wheels have seen a lot in its previous life.. it may even know your grandparent! well behold the PATRIOT, a 3 tons of metal on wheels that would take you everywhere.. even to war and back. with a 6.6 V8 Diesel Duramax powered engine it puts out 300hp @3000 rpm with a tuned torque of 930 nm @1650 rpm it offers 4 seats along its variants that consist of: - Wagon - Pickup - Slanted Back with and additional copy of each with heavy metal protection and enforcements.. along with a Police Lightbar configuration. Lightbar Control: the lightbar uses Front Fog " ffog " and Rear Fog " rfog " Lights the Roofrack Lights use EXTRA " extra " light Skin is Aligned as: Sides align with Top Top aligns with Front and Back No stretching or Shrinking will occur on any surface Drawing ratio is preserved thank you for your service COVER SCREENSHOT:
Published: BAVARIA A39 (version: 1) Submitted by: TheStigUSA Details page: https://www.lfs.net/files/vehmods/7C74FC DESCRIPTION: Quote :BAVARIA A39 Please review the dev thread! https://www.lfs.net/forum/thread/111981 This mod features an all-original and well-detailed 3D model, with lots of features and goodies. It comes with civilian config, but also comes with a lightbar and some default skins for Police/EMS/TOW role-play. Inspired by circa 2002 BMW E39 models. This is car 1 of 3 mods in the series - this is the "standard" 3.0L Inline 6 touring model. === CREDITS: Jere - LFSW: Kanker_aap - was commissioned to build a brand new 3D model in Blender, from scratch. This includes: Full 3D model of interior and exterior Two wheel rims models Separate bumpers and trims for the "N" model Support with the model, as needed Provided some textures, captured from reference photos, such as the door card texture in interior TheStigUSA - mod construction, texture generation, further 3D modeling, sounds, refinements, frame, handling. Ensured proper model dimensions, in comparison to real-world values. Re-sizing was necessary. Despite best efforts, the initial version scaling was quite off. Updated this on 02/Aug/25 to be much improved. Added various sub-objects including: brake rotors, gauge models, logo objects including setting them into the model, seat belts and buckles along with modeling them into the B-pillars, airbag cutout on dash, the model badges on the boot, bonnet, and on steering wheel, exterior door lock model, lightbar models are made by me as well. Texture work, including: various interior textures made from scratch, gauge textures made from scratch. Role-play (COP,TOW,MED) textures created by me as well Autohouse Performance Project - https://discord.gg/RsjPBHgF - for Brake Caliper 3D model Additional credits: SeanProdTV (LFSW: sean_drifter) for sourcing a video with sounds of a diesel variant. These are incorporated into the mod for eng .wav, intake sound, and starter. Same starter sound on all versions. CocaineCowboy (LFSW: yuylol) for project inspiration, and for providing reference materials and knowledge. COVER SCREENSHOT:
Published: FRAN STIEN (version: 1) Submitted by: AmagiMoon Details page: https://www.lfs.net/files/vehmods/E66A16 DESCRIPTION: Quote :the body was made in block bench of all things then updated and redone over years its first model version was from 2005 so i have full rights to model because was one who got ownership in 2007 and then modded the stink outa it since. the one who made bas was emerald in 2005 the quit modding work and i asked if i could save it from being trash canned they gave me full okay if i edited and made more decent that started in 2007 and its been kicking around since so body wheels and other main look bits was me and code for lfs stuff was krunal_01 they helpped make it work fully while i watched and told what it should have they have 50% credit also this is just a gas Vehicle version of the first car witch was a flop same parts visually 45kw 108nm motor, 35 fuel tank, 143km/h top speed, working lights inside and out, moveable steering wheel, and soo many more, kits like race , ute, van, and maby truck are planned for later implementation COVER SCREENSHOT:
Published: PAC OO7IL (version: 1) Submitted by: vobla32 Details page: https://www.lfs.net/files/vehmods/8061AC DESCRIPTION: Quote :This car is built in respect for 2pac and he's legacy. He and hes music was inspiration of my own record label: Voblas ieraksti (Voblas Records). Even label logo is idea from Death row records even shape what you can see on wheel caps. In respect of 2pac's hard work idea and his spirit this car was made. Big thanks to creators of this car AugustinasLFS (all work done by him) without him this project wouldn't be achieved YouTube video link of the car being modeled in blender3d by AugustinasLFS https://www.youtube.com/watch?v=t_S5BnaWR9Y COVER SCREENSHOT:
