Quote from Eclipsed :

It's just about sound (sound files or what does affect the sound?),to have more audio feedback from car to have better understanding what the engine is doing,I am in no need to duplicate any existing cars.

Would you like me to tune the FZ electric car or the XR formula E?

It’s not perfect but it has good under steer and over steer feel. It has good suspension travel and did break suspension on a 120 mph jump that breaks most cars

Quote from hooligan_rallyteam :

Which tires are you testing?

Road supers and hybrids. It took my test jump like a champ

Quote from Eclipsed :

I know it's a different field after all the V8 etc requests,but still - I'm wondering if you have tried to tweak sound of electric motors? They're really quiet in LFS...

1 thing to mention I’ve tuned and build more than V8s already, V6 turbo, In-line 6 turbo, inline4, and created a rotary sounding inline 4. Old 1920s1930s engine. And I believe to have been successful at it.

I will attempt anything. Give me an electric car, power numbers, and sound and try to match it.

Thank you

Please add more front tire! Car tends to under steer too much of tire difference. Shouldn’t be more than 20mm from front to rear tires example 255 front 275 rear

Anytime! Let me know what you think

Quote from scania :

which thread? I didn't see it

https://www.lfs.net/files/vehmods/AA2B40

Quote from scania :

https://www.lfs.net/files/vehmods/AA2B40
could u make a LS4 engine sound plz?

I made a sound for your car it’s posted in the car thread/comment section did you try it yet?

Yes please allow front rear rims to be different color or even different design all together

Quote from Scawen :

Yeah, as Flame points out, it makes a pretty big difference, so I hope you did switch on the option!

I got concerned that while in the engine sound editor, if anti-clip is enabled, then there is an issue that the person editing the sound can't tell if the sound will clip (because it will never clip). So that might influence the way they edit the sound.

So I think I should always disable anti-clip while you are in the engine sound editor.

Not going to lie of course I did not switch it on 🤣,(how stupid of me) but the sound is still too loud and it sounds distorted in the video.

I will note I did Send Jake_Blasted a new sound for his P166 mod that doesn’t clip or sound distorted, it’s up to him when he wants to upload it.

I will do more testing in couple of hours and get back to you with more accurate info.

Edit: P166 original sound has “exhaust pulse tone” it’s higher then lowest setting, I’ve noticed moving that up will make any sound distorted.

Last edited by martin18, Mon 29 Nov 2021, 12:28.

This is probably one of the best mods right now!

Wow dude you worked wonder with this mod! Great improvements: engine sound and performance, handling, suspension, AWD system, exterior styling! Just wow!

Only thing I’d say maybe turn down the engine inertia mul. (0.2) So it revs up a little easier, engine feels like it has heavy fly wheel.
Make the rear wing narrower so it’s the same width as the car


Keep up the great work! Thanks for fixing the clutch issue and improving the car

Quote from AEF :

I don't understand... 2.6L 600BHP with naturally aspirated engine? However, nice mod!

I made this engine and sound, look up 1990 RX7 GTO and tell me if those specs don’t match or if the sound doesn’t match. Sadly we don’t have Rotary engines yet, but we got inline 4 with 2 stroke available 🤣

Quote from Scawen :

I've added an experimental option to prevent clipping. It uses a small function on the output waveform to map 0...infinity to 0...1
So:
- it doesn't clip, regardless of how excessive the sound is or how many cars
- it is quieter, so you'll need to turn up the volume
- it is always distorted to some extent

I don't know how bad this distortion is.

I tried with many mods and many of my engine sounds and didn’t make much of difference.

At minimal just when it start to clip the distortion was not as bad but, still not enough to say it has helped.

Wow soo detailed this will be a fun car to race! But can we another steering wheel please 🤣

T/A Races let’s go!!!!

Just tested this and wow!!! handling, gearing, suspension geometry and body lean, landing jumps, and wo the antilag on the engine sound!! the sound of the engine could be better tunned but wow love this!!!

Love the mesh of all muscle cars! 70s rear trans am, with a Hemi/Camaro front! Can’t wait to hear these muscle cars V8 bombing down the straights!

True but I think softer better than higher and stiff. Those cars tend to roll and lean and pivot

Are we actually going to get an S14 Silvia that feels real!??? I’m excited for this

This is amazing!! Nothing like real life homework and research! Today I will be driving the car and see how it reacts! My main concerns right now are suspension movement and travel, and differential and torque split. I hope those are close to Real Life

Quote from Mr. Apex :

Thank you very much, Martin!
This super-light 95 kg V8 will go in my E30

I'm sure the engine will be super convenient for lots of other projects as well. Will test it out as soon as possible!

Ohh yeah 🤣 95 kg Is impossible with LFS modeler… it’s like 140 kg

Quote from Mr. Apex :

Awesome

The sound it self put it in the Engine Folder in the actual LFS folder
The engine it self you put it in the Modeler>Engine folder

Quote from Mr. Apex :

Awesome

https://www.radicalprecisionengineering.com/uploads/files/RPE-MACROBLOCK-2.7L-V8-TECHNICAL-DATA.pdf

this will be the specs

Pretty aggressive but wont clip. sound liked LS with Long Tubes and exhaust