This evening ther'll be the first race of CILFS, the most important italian championship.

32 drivers from the major Italian teams will fight from 22.15 on BL1 with the new FBM car.

Good luck to all!

Grats to the team and to the new CR Driver of course..

Quote from MikeB :

Team is added

Thank u mate!

Ops, i've just sent u a mail asking to add our team, and i found now the thread...

Well, the name is "Playerzone Team".


BTW, nice stats!

just arrivived the SMS with this great news...


HAPPY CHRISTMAS TO ALL !!!!

Last edited by Cr45h, Fri 21 Dec 2007, 16:42.

Quote from m3marte :

Don't know if it's a bug or it's intentional, but when engine is at idle for about 40 seconds, it stalls automatically.

Only BF1 doesn't auto-stall.

Did anyone else noticed this?

Yep, it's right... after about XX seconds staying in the box, the engine stops to work...

BTW, i found very difficult now to change gear (tried only the FBM)... I've to cut off the throttle, and, after 5 laps on BL1, my right leg hurts ...

But i know that now is more more realistic than before... I'm not sure if i've to do this an all cars, but i'm expecting that as on real F1 cars they don't lift up the foot to change gear, here too we don't need to do this...


With DFP i've to found another way to do the trick or soon i'll be at the hospital with cramps to the leg...


Thinking to the mirror... is real the fact that i can turn my head only 45 degrees... if i think that i'm doing the straight at 200km/h, i wanna see anyone of us trying to turn the head more with a wall of air hitting the helmet Even if i've more "dead points" on the visual...

And, well... i dont' think is realistic that looking behind a formula car it shows u the virtual mirror... Why i've to see who is behind me?? Mirrors on the sides are sufficient to know where is the position of other drivers...


One thing i didn't appreciate too much is that i can't read the speedo on FBM... numbers are very very small on the little display and ther's no rev limiter for the pitlane, so it'll be very very easy to have a DT penalty for the speed...

Maybe some improvements on this would be nice...

BTW, keep up the good work!

Impatient for the final release... :laola:

Last edited by Cr45h, Tue 11 Dec 2007, 11:00.

You have to be on the track while doing these commands...

like !top and !stats...

If u're spectator the command doesn't shows u anything...

Well... it works!!!!

Debian server

One note... when installing with apt it doesn't not install the library 2.0 but only the 1.0, so remeber to add library 2.0 also, needed by Lapper. I don't remember the exact name of the package, but doing an "apt-cache search mono" u'll find it easily near the end of the list.

Bye! (and thanks for help)

i've just to run it, but with wine i can't...

It says that i've to install the Windows versione of Mono to run .NET executables...

Last edited by Cr45h, Wed 5 Dec 2007, 20:01.

Hi all.

I've a problem with Lapper and Debian.

As the guide says, i need to have Mono and make. I've both of them. I've tried to run the command "make" as the guide says but i get an error:

"No rule to make target 'src/InSim.cs', needed by 'bin/LFSLapper.exe'. Stop. "

Ideas?

I've looked into src folder, and ther's Insim4.cs and no Insim.cs

Maybe this is the problem?

Thanks for help.

Today i've this problem too...

I've 2 servers, one S2 and other DEMO, both working from a linux machine with WINE, updated to last version.

The S2 servers works fine, but DEMO one give me the same error, and sometimes also JOOS-COUNT CONNS.

What it could be??



Thanks for help.

Thank u Gai Luron for continuing this beautiful add-on for LFS...

Merci beaucoup... :P

Quote from Cr45h :

Hi wonderous, about your prog that outputs html code to insert in a webpage..

I've make the exe file and putted into Lapper folder of my test pc. I've ran it but when it finishes, i've copied the output t gaves and putted in a page for showing the result...

The prog works, but it couldn't "read" the PB.txt file, so the table is empty..

Maybe I've forgot something?

Sorry for this quote, anyone could help?

Quote from wonderous :

I guess it's the preference of the developer.. php is not compiled file it's like c++ or java or any other language that you code in.. it is only compiled when the file is ran on the server and because of that it runs slower than compiled files like exe or cgis, that's a flaw of php, also, because you dont use a compiler to check for errors in the code you have to check to make sure the script has no coding errors and that can be tough especially when the code is subject to frequent modifications

Hi wonderous, about your prog that outputs html code to insert in a webpage..

I've make the exe file and putted into Lapper folder of my test pc. I've ran it but when it finishes, i've copied the output t gaves and putted in a page for showing the result...

The prog works, but it couldn't "read" the PB.txt file, so the table is empty..

Maybe I've forgot something?

Yep, it seems that in a local LAN it doesnt' work...

Maybe we have to change outsim and outgauge settings in cfg files... Any idea?

Hm, for showing into LFS the "non squared modes" u have to go in options---> display if I remember well.

it's one of the first three options under that menù.

When u change it, magically the list of possible resolution changes, adding the non squared like 1440x900 or highers.

The one thing I can't understand is that even if i've choose the max res I can with my monitor (1440x900 @ 32bit it's an HP 19'' wide), i noticed that ingame ther're the 2 black orizontal bars over and under the visual, as when we normally see a film in 16:9 in a non 16:9 screen.


Do u have the same problem or noticed the same "error" ? It's strange, cause in theory, if I've a 16:9 screen and i choose a 16:9 resolution, the visual should cover all the screen, or not?

Hm, I0ve noticed that our servers had been updated automatically about 1 week ago...

In any case, thanks...

Hi Franky,
I've sent u a mail about 1 week ago, but i've not received reply yet. There're some problem?


EDIT: Today i've see that u have problems with the website (forum and billing page are not accessible due to some errors). Argh...

Quote from franky500 :

If you want i will de-patch your server until the Lapper update fow W is out.

Let me know.
Let me know.

No Problem, I made the modification to Lapper cfg files, changing XF GTI to XFG and also to PB mixed file, and now it works correctly.

Thanks..

There are troubles with servers??

We've found the config of server set back to default one, without the modifications I do.
And, at now, I can't access to Control Panel... Page goes time out...

I'm the only?

Found a problem with 3.8 and V0.5 dedi server (not the V5 last patch).

I don't know why, but now, lapper register PB with XFG instead of XF GTI (as MOntabur says...[MONTABUR!! HI!!!! ])

So, when i press !top ingame, it shows the XF GTI PB registered, but not the new XFG PB that correctly he register..

So, I have to manually change XFG to XF GTI to make it work? Or I can change DefalutTopCar to XFG and then edit all the PB file with XFG instead of XF GTI?

What's best solution?

Thanks,

PLZ-Cr45h

EDIT: Damn, checked the dedi host version... it's 0.5W... hmm.... what can I do now?

Last edited by Cr45h, Mon 2 Apr 2007, 09:22. Reason : wrong dedi host version written... it's 0.5W not 0.5V

Any news about dedicated site with possibility to upload/download best rated custom cams for tracks?

BTW, Congrats for this very helpful tool! From now, all replay registration will be better!!

He wants to inform u that here on LFS Forum ther's a thread (3D) about LFSLapper.

It's here:http://www.lfsforum.net/showthread.php?t=3241

If u want any help about it, just put a reply with the informations u want and that aren't on the readme file of the prog.

Bye!

Quote from Gai-Luron :

For viewlap, you need a website with PHP, and mysql ( script need Temp table ). You have a Readme file in the zip who explain how to install viewlap. An exemple here : http://www.frh-team.net/lapperstat/lapperview/selpb.php
You'll have to configure Lapper to send the PBfile with ftp to the directory of viewlap in your web site.

Bye

Gai-Luron.

Hm.. With 500 servers I have a webserver with PHP and MySQL, I've added the FTP information on Lapper, and now I see the PB.txt on the server.

What exactly I have to configure in MySQL to make it work?
I've read some tutorial about MySQL and how to import from txt files the data, but, in the tutorial, it says that the informations from the same record (in our case, nick, time, splits from same driver) should separate by a TAB, and, in PB.txt, each information is in a new line. I think that I must use a sort of program that reformat the records to match with the MySQL requirements. Or I'm wrong?

Hm...
I'm a n00b, I know....

I think u are searching LFS Lapper? Try to look at the 3d of Lapper, maybe this is what u want...

Bye