My pedals stuck, the brakes and gas always "on" even when i don't touch them.
https://www.youtube.com/watch?v=w29-jDw9hFc
Read the description please in the video ^.

Help me please...

Sorry for my bad english

did u recalibrate them in windows and in LFS?
if not do it, it should help.

Quote from [RCG]Boosted :

did u recalibrate them in windows and in LFS?
if not do it, it should help.

I did it...
doesn't work.

Quote :

https://www.youtube.com/watch?v=w29-jDw9hFc -
3 and 4 are the brakes / gas and are stuck without me touching the steering wheel or pedals.

Hm are you sure? Surely brake/gas pedals is supposed to be an axis and not buttons?

http://www.speedlink.com/?p=2&cat=4319&pid=27305&paus=2&PHPSESSID=aadaefcd4c45935933da5e4a81248483&act_lang=en&PHPSESSID=aadaefcd4c45935933da5e4a81248483&PHPSESSID=aadaefcd4c45935933da5e4a81248483
Think this might be it:

Quote :

Why do the pedals only work digitally on the PC and how can I change that?
The pedals are factory set digitally. To use the pedals in the analog mode, press select + start simultaneously for approximately 3 seconds, then press the left arrow key on the Control Pad.

But really it does not seem like good wheel, for example even that official manual already has two big No-No's:

Quote :

Why does my racing wheel react with a delay?
A slight delay has to be considered as normal. The value is about 15°.

So large "deadzone" is not normal for wheels at all! Would be pretty much impossible to drive precise with that.

Quote :

Some buttons on the racing wheel are duplicated – why?
Besides featuring pedals and shifter paddles, the racing wheel offers more buttons than the original PS3® gamepad. However, as the console doesn’t support additional buttons, some are duplicated.

In reviews some people write that one can not use pedas together with shifter - only one or the other.

Yes, my wheel is for pc and ps3 too. The problem are the pedals for sure because when I disconnect the pedal cable from the wheel so the flashing of 3+4 stops.
I'll try to do this:
press select + start simultaneously for approximately 3 seconds, then press the left arrow key on the Control Pad.

Works! thanks!

im having the same issue, but i cant see SELECT button on the wheel
i got 3 of them called BACK, MODE and START

can i get help?