I'm trying to read some data of the cars in LFS such as inertia matrix through opening the CAR_info.bin files in Ultra Edit.
Then I get the inertia matrix of XRT:

[8D78FE44 667A69C1 A62F6A40]
[667A69C1 4CAD0944 7B92FC42]
[A62F6A40 7B92FC42 56A01145]

And make floats converted to decimal:

[-7.67E-31 16411073 -6.09E-16]
[16411073 11340100 9632834 ]
[-6.09E-16 9632834 10490181 ]

We can see I_yx = I_xy , I_zx = I_xz , I_zy = I_yz ,which indicates that the matrix is correct.
However, the value seems incredibly large, as we know the inertia of Yaw/Pitch should be around 2000kgm^2 in a 1200kg car.

I also read some other data but all the data doesn't make sense.
You can see the data in the pictures attached below.

Does anyone know where the problem is? Thanks a lot in advance!

There is something wrong with your conversion from hex to float. I tried to convert diagonal values with this https://www.scadacore.com/tools/programming-calculators/online-hex-converter/ (Float - Little Endian) and the results are: 550.707764 2035.76721 2330.021

Sorry to reopen the subject...
Can anyone help me understand this information please?

Body matrix of UF1:
0.9999993 5.044494E-04 1.048714E-03
5.024279E-04 0.999998 1.927014E-03
-1.049684E-03 -1.926485E-03 0.9999976

and the position of the reference point :
X= 3.052E-05, Y=1.80054E-03, Z=0.1132355
(except the Z = reference point at 11 cm from the ground, the rest is about zero but compared to what!?)

may be the COG point wich is an info findable in Editor