Arc Team is proud to present to the public and open the pre-orders of the new ARC_Handbrake, the device that was missing in the landscape of professional components of simulated driving.The ARC_Handbrake is a professional-type handbrake, which is designed both on the basis of measurements made on rally cars group N4 and S2000, with the advice of MRT, and using FEM analysis (Finite Element Method) to verify the structural integrity.
The ARC_Handbrake has also benefited from a thorough development with the help of Elio Minetti, rally drivers with 25-year career in groups A and N4.
ARC_Team has therefore decided to build a product better than the few on the market today, for both performance and build quality.
The frame is made entirely of brushed aluminum, laser cut, with a nice-looking surface finish.
The ARC_Handbrake has an original pneumatic system, consisting of a gas spring, which provides a great feeling and a response of the real counterpart.
The product was designed and built to accommodate up to two springs, for a total force to the lever up to 10 Kg, depending on the adopted type of spring (100 N or 200 N) and its positioning.
It is possible also to change the travel and the angle of the lever properly adjusting the preload.
A plus of the ARC_Handbrake that will be of interest to fans and see the light soon is to use it as a starting clutch in the functions typical of rally racing.
In addition, ARC_Team is also working on an adapter that will make the ARC_Handbrake mountable on Playseat driver’s seat.
The product will be available in three configurations, of which the first 2 are the following:
1) ARC_Handbrake DIY (Do it yourself)
a. brushed aluminum plates
b. TTEI screws and stainless steel nuts
c. stainless steel tubular lever
d. gas spring 100 N (10 Kg)
e. hall sensor with magnet
2) ARC_Handbrake STD (Standard)
a. DIY assembled components
b. Hall sensor electronic management system
c. USB 2.0 connection
Optional accessorizes:
- Gas spring 100 N
- Gas spring 200 N
- Full electronic system (mountable on ARC_Handbrake DIY)
From today you can preorder it trough our OFFICIAL STORE from F1driving.it . First deliveries will be by Christmas. For more information email us at [email protected]
The ARC_Handbrake has also benefited from a thorough development with the help of Elio Minetti, rally drivers with 25-year career in groups A and N4.
ARC_Team has therefore decided to build a product better than the few on the market today, for both performance and build quality.
The frame is made entirely of brushed aluminum, laser cut, with a nice-looking surface finish.
The ARC_Handbrake has an original pneumatic system, consisting of a gas spring, which provides a great feeling and a response of the real counterpart.
The product was designed and built to accommodate up to two springs, for a total force to the lever up to 10 Kg, depending on the adopted type of spring (100 N or 200 N) and its positioning.
It is possible also to change the travel and the angle of the lever properly adjusting the preload.
A plus of the ARC_Handbrake that will be of interest to fans and see the light soon is to use it as a starting clutch in the functions typical of rally racing.
In addition, ARC_Team is also working on an adapter that will make the ARC_Handbrake mountable on Playseat driver’s seat.
The product will be available in three configurations, of which the first 2 are the following:
1) ARC_Handbrake DIY (Do it yourself)
a. brushed aluminum plates
b. TTEI screws and stainless steel nuts
c. stainless steel tubular lever
d. gas spring 100 N (10 Kg)
e. hall sensor with magnet
2) ARC_Handbrake STD (Standard)
a. DIY assembled components
b. Hall sensor electronic management system
c. USB 2.0 connection
Optional accessorizes:
- Gas spring 100 N
- Gas spring 200 N
- Full electronic system (mountable on ARC_Handbrake DIY)
From today you can preorder it trough our OFFICIAL STORE from F1driving.it . First deliveries will be by Christmas. For more information email us at [email protected]