Good Evening Chaps,
Just a question, on my older computer i could connect first time no issues, on my new one when i connect to a server i jsut loose connection. I load track at startup to see if that did anything different but nada. Any Help is appreciated
Specs are as follows.
AMD Phenom Quad Core 2.3GHz
Nvidia GeForce 9800GT 512mb GDDR3 Model - Not the 1gig DDR2.
3GB Ram
250GB Samsung Hardrive - 7200rpm (afaik)
600W PSU
Asus M3n78-Pro (Motherboard)
DXDiag as Follows:
------------------
System Information
------------------
Time of this report: 4/12/2009, 20:27:57
Machine name: RICHARD-DESKTOP
Operating System: Windows Vista™ Ultimate (6.0, Build 6001) Service Pack 1 (6001.vistasp1_gdr.080917-1612)
Language: English (Regional Setting: English)
System Manufacturer: System manufacturer
System Model: System Product Name
BIOS: Phoenix - AwardBIOS v6.00PG
Processor: AMD Phenom(tm) 9650 Quad-Core Processor (4 CPUs), ~2.3GHz
Memory: 3070MB RAM
Page File: 2512MB used, 3843MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 10
DX Setup Parameters: Not found
DxDiag Version: 6.00.6001.18000 64bit Unicode
------------
DxDiag Notes
------------
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Sound Tab 2: No problems found.
Input Tab: No problems found.
--------------------
DirectX Debug Levels
--------------------
Direct3D: 0/4 (retail)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
---------------
Display Devices
---------------
Card name: NVIDIA GeForce 9800 GT
Manufacturer: NVIDIA
Chip type: GeForce 9800 GT
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_0614&SUBSYS_504019DA&REV_A2
Display Memory: 1779 MB
Dedicated Memory: 499 MB
Shared Memory: 1279 MB
Current Mode: 1280 x 1024 (32 bit) (75Hz)
Monitor: Generic PnP Monitor
Driver Name: nvd3dumx.dll,nvd3dum,nvwgf2umx.dll,nvwgf2um
Driver Version: 7.15.0011.8120 (English)
Just a question, on my older computer i could connect first time no issues, on my new one when i connect to a server i jsut loose connection. I load track at startup to see if that did anything different but nada. Any Help is appreciated
Specs are as follows.
AMD Phenom Quad Core 2.3GHz
Nvidia GeForce 9800GT 512mb GDDR3 Model - Not the 1gig DDR2.
3GB Ram
250GB Samsung Hardrive - 7200rpm (afaik)
600W PSU
Asus M3n78-Pro (Motherboard)
DXDiag as Follows:
------------------
System Information
------------------
Time of this report: 4/12/2009, 20:27:57
Machine name: RICHARD-DESKTOP
Operating System: Windows Vista™ Ultimate (6.0, Build 6001) Service Pack 1 (6001.vistasp1_gdr.080917-1612)
Language: English (Regional Setting: English)
System Manufacturer: System manufacturer
System Model: System Product Name
BIOS: Phoenix - AwardBIOS v6.00PG
Processor: AMD Phenom(tm) 9650 Quad-Core Processor (4 CPUs), ~2.3GHz
Memory: 3070MB RAM
Page File: 2512MB used, 3843MB available
Windows Dir: C:\Windows
DirectX Version: DirectX 10
DX Setup Parameters: Not found
DxDiag Version: 6.00.6001.18000 64bit Unicode
------------
DxDiag Notes
------------
Display Tab 1: No problems found.
Sound Tab 1: No problems found.
Sound Tab 2: No problems found.
Input Tab: No problems found.
--------------------
DirectX Debug Levels
--------------------
Direct3D: 0/4 (retail)
DirectDraw: 0/4 (retail)
DirectInput: 0/5 (retail)
DirectMusic: 0/5 (retail)
DirectPlay: 0/9 (retail)
DirectSound: 0/5 (retail)
DirectShow: 0/6 (retail)
---------------
Display Devices
---------------
Card name: NVIDIA GeForce 9800 GT
Manufacturer: NVIDIA
Chip type: GeForce 9800 GT
DAC type: Integrated RAMDAC
Device Key: Enum\PCI\VEN_10DE&DEV_0614&SUBSYS_504019DA&REV_A2
Display Memory: 1779 MB
Dedicated Memory: 499 MB
Shared Memory: 1279 MB
Current Mode: 1280 x 1024 (32 bit) (75Hz)
Monitor: Generic PnP Monitor
Driver Name: nvd3dumx.dll,nvd3dum,nvwgf2umx.dll,nvwgf2um
Driver Version: 7.15.0011.8120 (English)