Is anybody able to figure out the G25 pedals pinout?

This info is needed to make a cable for the separate pedals connection through its native plug to a USB controller.

Thanks, if anyone can help

well not sure of the pin out on it. I used this USB http://www.lbodnar.dsl.pipex.com/joystick/index.html and here is what i found with the pots perhaps this can help?

But you also can use a VMeter on each end to find the pin placements.

I also went from Step range 0-255 on all pedals to these. They are now super smooth. I was having some sensitive braking issues with N2003 and they are all now gone!!!

LFS has also transformed into a much smoother pedal situation after this add-on for the pedals.

Using the Z , RX and RY Axis.
Gas= 980-123
Brake= 972-91
Clutch= 967-124

Thanks Fearwhat. This info is actually for Leo I have his USB controller, and he fixed me up with connectors for my DFP. I now have the G25 and asked him for a similar thing.

He does not have a G25 so needs the pinout info in order to make the connectors for me. He has made a thread here.

http://forum.rscnet.org/showthread.php?t=280678

Would you be kind enough to give the info that you have?

Thanks. I'll direct him to this thread also.

EDIT - I see you've got there already

Hehe no problem Maybe when i get home from work I will take my vmeter and label the d9 connector's output and post it.

Glad to help.

Would that give Leo the exact info he needs? If so then please do, no maybe about it Cheers

yes i am going to do it when i get home. Leaving work in about 30mins. Will be home in about 1-2hr's

Pin out has been posted
http://forum.rscnet.org/showthread.php?p=3349071#post3349071