My little 318is. Few mods like polybushings, E46 steering rack, LSD. Quite rolly in the photos because it was missing a rear anti roll bar







Going in for an M54B25 swap from an E46 in the coming weeks

Is there going to be a 100% OFF voucher for Pereulok players as well? They had a nice game free of charge for years and it would be a shame to take away that right!

Quote from Racer X NZ :

Who the phuq do you think you are you entitled little arse.

If you can't afford something then don't buy it. Can you understand such a basic concept, probably not !

It's entitled wankers like you who are incapable of understanding the difference between 'Want's' and 'Need's' that just show what this planet is becoming.

Lots of people know what a low income is, and LFS is not a 'Need' in life, it's a 'Want'

This whole concept is probably completely beyond your clearly limited understanding. I recommend suicide as a solution to your life problems.

(EDIT: As a buddhist, this advice simply counts as 'restart' in the game of life. )

wyse words

it's live for speed not need for speed

Fixed the problem by loading WE1X first and then switching to WE1Y

Seems like the problem only happens when changing track to WE1Y. It doesn't matter which track it changes from.

Quote from cargame.nl :

Eehh but.. Your log says WE1Y?

edit: Granted, track isn't loaded yet.. so the OOS probably is about the "old" track.

Doh, had a brain fart moment. It was on that layout and switched to this one: http://rcruise.net/WE1Y_RC_CRUISE_LATEST.lyt

Yeah it's possible. Here is the layout file: http://rcruise.net/AS5X_RC_CRUISE_LATEST.lyt

Hi,

Any idea why this happens during track changes sometimes? The host is running on wine 1.8.1


Thanks.

Quote from T3charmy :

Seeing as this hasn't been done yet. Would you like me to go ahead and release this?

Go ahead! I've been busy with work this week and haven't got a chance to dive into personal projects

Yes it's possible. Just join every single server in the master server list and you will see!

Quote from Dygear :

Wanna make up release for that? 0.5.1?

I didn't do a release as I wasn't sure of the procedure for doing these releases

Hi all,

I pushed the packet changes for 0.6N to GitHub today.

You can see the commit here: https://github.com/Dygear/PRISM/commit/45dcb7b9562c5636bf43722d55d87d818356fb41

Hi Scawen,

Noticed a typo in the InSim.txt documentation:
SMALL_LCS, // 7 - instruction : set local car switches (lights, horn, siren)

It should be 9, not 7

Well, Kimsufi servers aren't even supposed to be used in a commercial environment. They are for personal use/storage or development purposes.

OVH don't even provide proper support for these servers and they only come with single hard drives which have been used for a long time before. This means there is no RAID and the possibility of hard drive failure is not small.

I suppose you get what you pay for - cheap hosting at a reliability cost. If you're just hosting a simple LFS server with no persistence layer required then it's good enough.

Quote from cargame.nl :

Why do I see this all the time in the deb log?

Feb 26 01:34:53 CG™» Dave^L left the pits (FXR)
Feb 26 01:34:53 IS_JRR - connection has no join request

I am sending a JRR to every NumP=0 and in this example there is a NumP=0, so there is a join request? Or is this message being generated because I send a JRRAction1 but empty StartPos? (sounds strange to me).

The log gets bigger then needed if every left the pits line is followed by this. Do others have this too?

Did you enable the JRR flag in the PRISM host configuration?

Would be cool but somehow I doubt it

I am always using TCP only and stream_socket_recvfrom has been working fine for years!

Running PHP 5.6

Doh! I realised the stack overflow happens when I replaced the DCon executable with a new version whilst the server is still running!

My bad

I have made a pull request for all the latest InSim changes required for patch 0.6M.

Currently using this changeset on the RC servers. Works good

Anyone else notice any issues with the DCon.exe in these test patches?

I had issues with K21 and older versions running with wine on Debian. When I left the DCon overnight the server would die overnight due to a stack overflow.

I'm not sure what the issue is because the server was completely empty when it happens.

I am testing K26 overnight now, will report what happens.

Didn't have any issues with 0.6K

Quote from Scawen :

This is not really a bug, though I think it could be improved.

It is because the "optimise" button needs to be pressed. You can see this in the "more" section of the layout editor.

Objects are automatically optimised after loading them from a layout.

Ah, I'll give it a test! Thanks

Hi Scawen

If you place the start lights object mid-race and try to set the lights for it, they will not do anything until the race is restarted or ended and started again.

Is this a bug or should it be like this?

Thanks

Quote from Victor :

yeah I was wondering about that, but got no feedback until now.
code vs icode
or
code vs c

hmm if you write it like that, c just seems shorthand for code.

Exactly.

Quote from Victor :

inline code block rather than the usual block-type.

I've made this in my version with [c]. Should go live over the weekend I think, after I finish the first part of car setup management.

Ah, [icode] makes more sense then