Hi all,
i hope this question has not been done already.

I have a little problem about team ownership on LFS World.

Actually, i'm the only "owner" of the team, so the only person that can edit/add/remove people from the list of members.


Actually there're 2 owners of the team, so i think it's correct that both of them can edit these info (majorly the possibility to add and remove the members of the team).

My trouble is that i don't know how to add the other username, if there's some special character to use (fe: write username1, username2) or somewhat else.

Can anyone help me?

(and sry for poor english)

Off...

U've to STOP updating Airio so frequently!!

I can't work on it as quicly as u do!!


of course i'm joking...

GREAT !!!!!!!


About italian translation, i've quite finished it, maybe before send it to u i'll use on my own server for betatesting to see if all the translations are shown correctly...

LOL!

About Italian, i'm translating the language txt file...

ASAP I'll finish, what I have to do to make it usable and/or add it to language pack?

LOL !

ok

I thought there was my problem..


Well... Downloading it right now


I'll keep u informed


BTW, great work mate!! :smileyrai

Hum...

In fact, i've just started Airio with minimal cfg (following _Config.txt file, just to try it).

This is the log...

This is the error i get...

And same error with mono on linux...

Quick Question:

Can Airio be run on Linux server using Mono?

Maybe someone else has already ask this question but:

It's possible to set an AutoRestart message?

I mean.. Once i set AutoRestartRaceMn, there's nothing i can look at to see how many seconds are left before autorestart command. I can "create" an event and write text to say restart in 5,4,3,2,1..

and also.. when i reach the track change number, i can display a message to say "next restart - track change" and insert the new combo?

-----------------

EDIT:

New question: Just tested Lapper[test] server to see pitboard at work... It's really nice but... Once i saved the position of pitboard, how i can change it? :P
W8ing for next Lapper + PitBoard version!

Keep up this great work

Last edited by Cr45h, Sat, 21 Feb 2009 17:26.

Good Evening,
Till yesterday evening i had problems with one of my LFS Server.

Sometimes it says:

"TCP: Cleared Emergency Store" (in green)

What does it means? I've to worry about it?

The strange thing is that, someone starts to have troubles with connection, and i start thinking it can be connected to this problem.


Thank you for replies,

Cr45h

...that were born (as me) today, 6th January...


We're the best!

Well.. I've the original Z patch but sometimes i have this problem too..

Does anyone knows how it happens?

I don't know where and how to say it, and I really don't wanna be "megalomaniac" saying it, but, i think that it's funny...

Well.. I'm talking about the WR Holders Chart, that since today, at about 17.00, changes face:

Ladies and Gentlemen, the Playerzone Team wants to announce that 2 italians drivers are at the top of this chart, but, what i'm proud to say is that these two guys are brothers !!!



Their names are Malcomax (PLZ-MaxNorris) with his G-25 and Ulisse (PLZ-Ulisse), renamed by us UF-lisse, with his famous mouse!



And, to celebrate this particular moment, this is what they made:




I just wanna to congratulate with them for the hard work they made to reach the top of the WR Holders!

Last edited by Cr45h, Fri, 17 Oct 2008 23:58. Reason : resized img

Ok, i've told with the admins of french servers and they decide to ban him on their servers.

I just want to sorry with u for my "a-little-bit" angry post, but i was really furious yesterday in the night looking at my few decent split times going into smoke cause of that floating mine on the track.

Hi all,
with this thread i'm asking to LFS admins to take some decision about this "racer".

His LFS username <has been removed>.

Here there's a little replay of what he's doing on a french server, while the other racers are testing their setups 2 days before the official start of french championship.

The nickname he used on this race was "Weed Smoker".

He's continuing crashing and wrecking other cars, and using some bad language we know is not a synonym of a clean racer.

What i'm asking is to do something to prevent this man to continue doing what all of you can see.

I know this is only a little opinion of one racer that was there, but i can ask to all other drivers there to come here and made their reply about him.

Thanks for your attention, and sorry for some english mistake

Last edited by Bob Smith, Mon, 22 Sep 2008 23:08. Reason : removed name and shame - check the replay to see the username

Congrats!

Just a "noob" question: with old LFSStat the advanced statistic result was displayed in a simple coloured table. Now, the result shown is seen in a totally white table, so it's a bit confused.

Maybe i'm doing the work in a wrong way, but if i'm true, it's possible to configure the CSS or he HTML page to see it in a nicer way?


Or u've just done in in the last update... mm... i'll look at it right now

BTW, thank u for the work!

Quote from sun :

then its right... look.

#################
#General options#
#################
$Host = 127.0.0.1; # Host IP. When more network interfaces are present, set it to IP of your host.
$Port = 29999; # Insim UDP port. Open this port after starting LFS Server by typing /insim=29999 in chat or include it in config-file LFS Server
$Password = "test"; # Put in the admin password used on the LFS Server
$TrackInfoFile = "trackInfo.cfg"; # Path to the TrackInfoFile used to compare splits
$TCPmode = true; # Connection to LFS in UDP mode or TCP mode
$EnableRegisterWeb = true; # When set to "true" your LFS Server is displayed on the FRH Team website
####################

as you can see, my admin pass is set as test and in my server.cfg in the dedi server, it says test to....

// host name
/host=^1Drift test

// optional: password
//pass=password

// optional: admin password
/admin=test

// optional: InSim port
//insim=29999

// optional: local specified ip address
//ip=xxx.xxx.xxx.xxx

// a high number below 65536
/port=63392

// demo/s1/s2
/mode=s2

// no/yes/hidden
/usemaster=yes

// BL1/BL1R/BL2, SO1/SO1R/SO2, etc
/track=AS5R

Maybe "Insim" parameter... Now is set as comment (double "/ " ), try deleting one of "/ " and connect it again

Quote from Bladerunner :

So have I...what is it and where can I get it? I have searched the forum, yet the ONLY reference I can find is in this post?
Can you give me a link please?

First post here in this thread...

"PBLFSLapperPHPViewer By Gai-Luron
http://ks37764.kimsufi.com/mods/PBLF...PViewer1.0.rar"

After the explanation of what is Lapper and what it does, there're a few links of some tool to get the infos on a webserver.

That's what i wish to do. The problem is that i don't know how to do it.

Hi Gai, hi all...

I have a question about PBLFSLapperPHPViewer.

Prior, i'll try to explain the actual conditions:


I've 3 LFS Dedi servers running on the same machine, and 3 Lappers (one of each server), with synchro PB.txt files running good.

Now, my problem is to show these PB on a webpage, and here comes your PBLFSLapperPHPViewer.

Following the readme, it says to put "def.txt" in the folder where's pb.txt file. But, i've multiple pb.txt files in different folders, so, where i have to put it?

(to be clear, my idea is that, if pb's are synchronized, one should be equal to the other's, right?).

The website is hosted on aruba (if i remember well), so, from the remote server to aruba, i think i've to set the "FTP" section of lapper (now disabled).


So, how i can configure PBLFSLapperPHPViewer to work correctly?

Possible Workaround: I have a "small" website running on the same server as the game-servers are running, can i use it to show the webpage and maybe link the webpage to the main team-site (maybe in a nice box or a dedicated page or don't know..)


(i know, i'm a bit confused )


Thanks in advance for the help.

Hmmm... I'll take a look and i'll let u know...


Thanks for the help.

Well, the idea to have the program work sounds good , but of course i know that's not easy to start creating the program from 0.

So, as i really don't know where to start, any kind of suggestion is really appreciated.

Hi all.

I hope this is the right place to ask.

Well... With my team, we're going to set up a championship. Our idea was to do a little standings (out of the main champ) while doing prequalify. I mean, a series of small races (under 10 laps) in "training mode" and to give points automatically as every race finishes, to improve drivers training themself on the server instead of offline mode.

The problem is that i don't know how to do it, and how to automatize it.

I think there should be some sort of program that takes the data as races finishes and, based on the final standing, give the points. And, finally, users can show the standings on an easy-to-use interface directly inside LFS, typing some special command (ex: $stands).

Do u think it should be possible to do this kind of integration or i'm asking too much?

Thanks in advance for the help.


Cr45h

Last edited by Cr45h, Fri, 11 Jul 2008 17:30.

This will be the combo we'll use for our little champ:

Fern Bay Gold (FE3)
South City Town rev (SO5R) (maybe SO6 but we've to check)
Aston North (AS7)
Blackwood rev (BL1R)

So, no rally combo is used... For now, i've set the server to have 20% intake restriction on FXO, no mass added.

But if u say that it's quite impossible to make equal the 2 classes, the only thing i can do is to change the cars we wanna use...

Hi all,
my question is simple:

Between a RB4 and a FXO, all of us knows that FXO is faster. So, what is belong u the best balance between this two classes to have the same lap times?

I'm talking about intake restriction as well as Mass KG...

All the thread i found talking about balance haven't a real indication in numbers of what could be the best, so.. Here ther's the question.

Thanks to all will reply.

Cr45h

I've tested it and it works right, i've added FXO restriction and it works.

The only problem i have is that our dedi server is on a linux OS, and if i try to start the tool on linux i can't...

I've used mono and also wineconsole but both of them gives me an error..

Anyone of u tried to run the tool on linux? (i've Debian distro on the server).

Thanks.
Cr45h

Yeah, i imagined that someone of u was gone, cause the total point was less than last time i look at it :P

I don't know who is the driver, but anyway i'm sorry to know this bad news.