The online racing simulator
Post your Car two
(2438 posts, started )
Haven't been on here in a long time. Thought i'd update since i got a new car about 6 months ago. goodbye Jeep, hello 128i coupe. As she sits currently, the wheel's are plastidipped, not painted. And they're my winter rims.

Would be nice with a normal number plate on a normal spot (hint: where it's meant to be).

Quote from Derv94 :Stuck my dashcam on today, for £30 the quality is awesome, this is footage of the only good part of my journey http://www.youtube.com/watch?v ... ruxw&feature=youtu.be

Holy shit, you overtook on the wrong side of the road while the other idiot was on the wrong side too.

Mind = blown.
-
(Bose321) DELETED by Bose321 : wat
Quote from Bose321 :Would be nice with a normal number plate on a normal spot (hint: where it's meant to be).


Holy shit, you overtook on the wrong side of the road while the other idiot was on the wrong side too.

Mind = blown.

That is a normal plate, I'm in the USA. I have no desire to drill holes to put a bright orange fugly license plate in the center of it, It looks even worse than it does now. i'd run plateless but i drive too much to risk it. The tow hook mount at least lets me remove it for car meets.
That front bumper just looks a bit weird and naked. Would be nice perhaps without the indention I guess (if that's even a word :tilt.

How do your summer rims look like? I really love the 1 series.
Quote from irollgen4s :..I have no desire to drill holes to put a bright orange fugly license plate in the center of it, It looks even worse than it does now..

Regardless of the drilling aspect, do you think the plate looks worse centered, or did you just mean the holes in the bumper do when you completely remove the plate? I agree with Bose that if you have to run one, it'd probably look better in the middle/that the cover looks a bit odd & naked as is. Also, while I've always lived in states where front plates were optional, I've seen multiple mounting solutions over the years from others who also didn't want to drill. Surely there're alternatives for BMW's?

Quote from Derv94 :..if it gets very annoying i may modify them so if you could get me a pic that'd be great as i don't know how i'll go about it yet..

Here's a bad pic of the back of my Tamiya rim. I realize it's likely not helpful for modification of yours, but there's a chance Tamiya and/or another manufacturer makes your rim with a similar spoke design..
Attached images
Tamiya Rim1.jpg
Quote from Bose321 :That front bumper just looks a bit weird and naked. Would be nice perhaps without the indention I guess (if that's even a word :tilt.

How do your summer rims look like? I really love the 1 series.

I used to run the plate centered Since the holes were already drilled for it. I got a new bumper due to unrelated circumstances and didn't want to put a drill to a very expensive front bumper, so i opted for the side mount. I do agree centered would look less awkward, i've just grown fond of the offset look now. Here's a couple pictures with my centered plate+summer wheels


Looked good. Again, if you ever want to go back without mucking up the cover, I imagine searching the topic would yield some idea's.
I'm sure i could use something like velcro, i just prefer the simplicity of the tow hook mount. I may look into in the future, eventually when i drive less, i'm just going to run plateless. i drove plateless for a few weeks while i waited for the mount to come and i had no issues.
Then you'd have fugly velcro & a plate that could fall and/or be rather easily knocked off. The first thing that came to mind was make a bracket of sorts that attaches in the opening that the plate overhangs. There're a few different ways one could make that work, have a solid mount & leave no trace or marks on the front of the bumper cover. I think I've seen variations of the idea sold commercially.
Why not just uses double sided tape to stick it on? No fugly screws and it would fit properly.
Quote from Jakg :Why not just uses double sided tape to stick it on? No fugly screws and it would fit properly.

Because you want it to hold.
Quote from Bose321 :Because you want it to hold.

Decent double sided tape holds perfectly well, as long as the two surfaces are clean and you use enough of it. I use it all the time at work and I've never had a plate fall off If you do use screws just get some of the coloured caps and hide them well
Looking good R3DMAN!

Quote from Jakg :Why not just uses double sided tape to stick it on? ..

Then every time you want to go plate-less you've gotta deal with removing the tape/adhesive, make sure you stick it back on straight etc. Not brain surgery, but annoying none the less. For a center mount I'd do something like what I suggested and/or the colored cap idea above. So.. what state has orange plates and is a big enough jerk to actually require both?

Distantly related rant below: (regarding a ticket)
While traveling recently I got stopped for an expired registration. I was pissed to start with because the cop had to tailgate me @ interstate speeds to get my info. (soo wanted to brake-check him!! he didn't have his lights on either, so I wasn't sure what was up for a minute) Anyways, I get home to find he's given me an out of date number. After calling it & getting hung up on for about a week, I Google the right one and speak to a human. Turns out he didn't give me all the paperwork either, like the slip that's actually got the citation number @ the top. (resulting in the clerk getting pissy with me) Fine's $190, same as if I'd been going 16-21mph over the limit & the only way I can get a payment plan is if the magistrate WITNESSES my signature?! (meaning I drive 3h one way) I've been ticketed all over the country and haven't ever ran into that before. (it's not that I don't have the money, but paying it may result in having to postpone my FI plans a tad, heh) If I didn't have a personal plate it'd have been good until the end of March as well. That combined with my having not received renewal papers yet for whatever reason, caused me to completely forget about it. :doh:
Quote from Bose321 :Because you want it to hold.

Quote from R34GTR :Decent double sided tape holds perfectly well, as long as the two surfaces are clean and you use enough of it. I use it all the time at work and I've never had a plate fall off

I bought a new number plate in ~July 2010 and then fitted it with double sided tape.

In Winter 2012 I had to put a new front bumper on, and remove it... jesus it was stuck! I genuinely thought the plate would break before the glue gave way. Was well impressed!
Quote from Tinytacohead :Then every time you want to go plate-less you've gotta deal with removing the tape/adhesive, make sure you stick it back on straight etc. Not brain surgery, but annoying none the less

Running "plate-less" isn't really an option in the UK, so it's never really bothered me.
Quote from Jakg :..Running "plate-less" isn't really an option in the UK, so it's never really bothered me.

Not to drag on, but you pointed out how well tape can adhere & the situation was regarding somewhat frequent add/removal of the plate. Goo-Gone type removers help, but from my experience, sometimes it still takes the power of the dark side to completely remove 3M & similar.
Boiling water, dental floss and some

Then a bit of buffing up

Bye bye goo
Yeah, that's basically been my method in the past. Ditching said process in favor of an ultimately simpler one ftw! (when possible of course)
Picked up my new project today.. Very happy!

404
Fixed!
Ha! What kind of project do you have in mind?
Quote from Tinytacohead :


Here's a bad pic of the back of my Tamiya rim. I realize it's likely not helpful for modification of yours, but there's a chance Tamiya and/or another manufacturer makes your rim with a similar spoke design..

i may actually just create fins on the current wheels but not really been needing the bents recently so not been an issue

Started my watanabe wheel refurb today
-
(Bose321) DELETED by Bose321
Good deal. Leaving the spokes black? (thought the grey/green combo of your last set was great)
New York state, of course. I just have no desire to center the plate and have to do more then loosen a few screws to remove it. The tow hook mount really doesn't bother me, it has a couple other mounting options too, i just chose that one because i thought it was the least ugly.

Post your Car two
(2438 posts, started )
FGED GREDG RDFGDR GSFDG