The online racing simulator
FZ50 GT3 Cup: Setup Restrictions (Setup finalised)
Fixed settings

Suspension

Spring stiffness:
102.3 N/mm R / 87.8 N/mm F

Bump Damping: 8.3 Ns/mm R / 6.8 Ns/mm F

Rebound Damping: 10.5 Ns/mm R / 9.8 Ns/mm F

NOTE: Spring stiffness and bump dampers have been set by the average calculation of all WR sets. Extra: Also, Anti Roll bars are based on the average of all WR sets but you can change it if you want.

Front wing: non-adjustable (1 degree)

Number of permitted tyre compounds: 1 (R3)

Added mass position: 37%

(possibility to change to 100%)


Maximum brake power per wheel:
1869 Nm

Differential: Power: 40% / Coast: 60% / Preload: 180 Nm)

Fixed gear ratios:

1st: 3.167

2nd: 2.133

3rd: 1.722

4th: 1.400

5th: 1.130

6th: 0.931

Final Drive: 4.000


Adjustable settings

Camber

Caster

Toe In

Rear wing: (12 degrees max)

Ride height: (100mm max)

Anti Roll Bar

Steering lock

Parallel Steer

Tyre Pressures:

Brake bias (advice: 60% is good)
Attached files
FZR_GT3 Cup.set - 132 B - 1217 views
This thread is closed

FZ50 GT3 Cup: Setup Restrictions (Setup finalised)
(1 post, closed, started )
FGED GREDG RDFGDR GSFDG