Cruise Control Mod for LFS - techdemo version
=============================================

1) Installation instructions
  a) Copy all files in this archive into your LFS directory
  b) Adjust the crsctrl.cfg file (details below)
  c) Enable OutGauge ob port 30000 in cfg.txt
  d) Launch CruiseContHelper
  e) Launch LFS with InSim enabled on port 29999

2) Usage
  Use the on-screen buttons to control the cruise control. Note that it is operational in practice mode only!

  Set/Coast - enables cruise/decreases speed if cruise is active
  Accel/Resume - restores last preset speed/increases speed if cruise is active
  Clicking on the status info button disables cruise altogether and deletes the preset speed
  Rightclicking on the Accel/Coast buttons changes the speed in 10 km/h increments

3) Setting up the crsctrl.cfg file
  The mod has to know which axis of the controller you use to drive in LFS is the throttle. Possible values of AXIS are "X, Y, Z, RX, RY, RZ, S0, S1", I believe that SEPARATE and INVERTED lines are self-explanatory (0 = no, 1 = yes).

  Please note that your axes configuration in LFS might not match to what you have to set in the mod's configuration - you'll probably need to experiment a bit to find out the correct values (sorry about that).
  The default setup works with Logitech Driving Force Pro with the latest Logitech drivers and separate throttle/brake axes. Combines axes settings for the same device is AXIS S0, INVERTED 1, SEPARATE 0

4) Limitations
  - The mod only works only if you use an analog controller to drive in LFS, keyboards or mouses are not supported.
  - Compatibility with other DLL mods is unknown.